You are here:Home > News >

Detailed introduction of 3003 aluminum sheet hardness

News Details
    The specific hardness of the 3003 aluminum sheet is the hardness of the 3003 aluminum sheet determined by the annealing state of the aluminum sheet. The retreat state is different, the hardness of the 3003 aluminum sheet is also different, mainly depends on the 3003 aluminum sheet application. Aluminum sheet manufacturer Mingtai Aluminum will give you a detailed introduction to the hardness of 3003 aluminum sheet today.
3003 aluminum sheet introduction
 
    3003 aluminum sheet belongs to aluminum-manganese alloy aluminum sheet, belonging to rust-proof aluminum sheet series, also known as rust-proof aluminum sheet, alloy aluminum sheet and so on. The 3003 aluminum sheet has manganese and therefore has industrial corrosion resistance. The performance of the aluminum sheet is also high, the corrosion resistance is high, and its anti-rust performance is better than that of the 3003 aluminum sheet. Now the application of the 3003 aluminum sheet is gradually widening.
 
    With the requirements of the project contractor, the 3003 aluminum sheet has gradually covered all the 3003 aluminum sheets on the market, and its application in anti-rust performance has gradually widened its application in corrosion resistance. In particular, the 3003 aluminum sheet has gradually increased in the market in recent years.
 
3003 aluminum sheet hardness introduction
 
    In fact, in theory, the hardness of the 3003 aluminum sheet is the same, but the strength of the hardness is different through different processing. Including, elongation, tensile strength. The hardness of the 3003 aluminum sheet itself is the highest, but the hardness obtained by the 3003 aluminum sheet annealing process will not be different.
 
    We often have "3003 aluminum sheet H24 state" "3003 aluminum sheet H14 state" "3003 aluminum sheet H22 state" "3003 aluminum sheet H18 state" "3003 aluminum sheet O state" ... and so on, in fact, the 3003 aluminum sheet is called the same, behind The "H state code" is a key to the hardness of aluminum sheets. This is theoretically called the subdivision state of H.
 
    In the simplest case, the first digit after "H" is the beginning of 1, and is called a single processing state. It is in the H1X state without being subjected to the annealing process, but is rolled by a rolling mill and is not annealed. Only this intensity state of processing is required.
 
    The 3003 aluminum sheet at the beginning of H2X is incompletely annealed. That is to say, after a short time annealing, to reach a high temperature product, in this way, his strength can be minimized and completed under the specified indicators.
    The above is the aluminum sheet manufacturer, Mingtai Aluminum to give you a detailed introduction about the hardness of the 3003 aluminum sheet. I hope that through this article, you can have a new understanding of the hardness of the 3003 aluminum sheet. Mingtai Aluminum, the 3003 aluminum sheet can be produced in various states, with full product specifications and fast delivery!